รายละเอียด
ข้อดีและคุณสมบัติ
พารามิเตอร์
พารามิเตอร์สินค้า
| พารามิเตอร์ | Specification |
| วิธีการตัด | vertical cut |
| Maximum slice size | φ400mm |
| ขนาดการตัดสูงสุด | 300*300*300mm |
| ความหนาของการตัดสูงสุด | 300mm |
| ความขรุขระของพื้นผิวการตัด | ≤0.05mm |
| ความแม่นยำในการตัด | ± 0.05mm |
| การทำซ้ำ | ± 0.01mm |
| วิธีการขันให้แน่น | เครื่องถ่วง |
| เส้นผ่านศูนย์กลางของลวดเพชร | 0.33-0.45mm |
| สกรูนำและรางนำทาง | สกรูนำความแม่นยำสูง + รางนำเชิงเส้นความแม่นยำสูง |
| ตลับลูกปืนล้อแบบเกลียว | นำเข้า |
| วิธีการขับขี่ | Servo Motor |
| ขนาดภายนอก | 1500*1100*1860mm |
| น้ำหนักรวมของเครื่อง | ≈970กก |
| พลังทั้งหมด | 2KW |
| แรงดันไฟฟ้า | AC220V 50-60HZ |
| การป้องกันไฟฟ้าขัดข้อง | มี |
| ระบบควบคุม | X80 – Touchscreen |
การใช้งาน
คำถามที่พบบ่อย
Wafer slicing converts silicon ingots into thin wafers using a wire saw. The ingot is mounted and pressed against a wire web moving at high speed. Diamond abrasive or slurry removes material gradually. After slicing, wafers undergo cleaning, lapping to remove damage, and polishing to achieve mirror-like surfaces for device fabrication .
Endless diamond wire saw is considered the best tool for silicon ingot cutting. Compared to band saws, it offers lower edge chipping, superior surface quality, and reduced material wastage . It handles ingots up to 18 inches with ±0.02-0.03 mm repeatability. Some manufacturers also offer electroplated band saws for specific applications .
The machine uses an endless diamond wire loop running continuously between guide rollers . The ingot mounts on a programmable feeder that moves vertically against the wire web. Servo motors control feed rates while coolant removes debris. Multi-axis control enables both slicing and complex shape cutting with ±0.02 mm precision .
Commercial silicon ingot cutting machines typically range from $30,000 to $90,000 depending on capacity and features . A production-grade 18-inch silicon ingot cutter with automation starts around $30,000+, while high-precision research models with advanced controls exceed $80,000. Price varies by ingot diameter, automation level, and precision requirements .
It’s a precision machine tool for semiconductor and photovoltaic industries to cut silicon ingots into wafers and perform cropping/seeding operations . Using endless diamond wire technology, it achieves ±0.02-0.05 mm accuracy with minimal kerf loss, handling ingots up to 18 inches in diameter for applications like top/tail cut, bridging, and seeding .
The machine typically lasts 10-15 years with proper maintenance. Diamond wire life depends on cutting parameters—high-performance wire achieves 250-500 cm²/m cutting area before replacement . Optimized wire management systems minimize non-cutting wear, significantly extending wire life. Wire accounts for approximately 9% of wafer production costs .
