Açıklama
Avantajlar ve Özellikler
Parametre
ürün parametre
| Parametre | Özellikler |
| kesme yöntemi | dikey kesim |
| Maksimum dilim boyutu | φ400mm |
| Maksimum kesme boyutu | 300*300*300mm |
| Maksimum kesme kalınlığı | 300mm |
| Kesme yüzeyi pürüzlülüğü | ≤0.05mm |
| kesme hassas | ± 0.05mm |
| Tekrarlanabilirlik | ± 0.01mm |
| Sıkma yöntemi | karşı ağırlık |
| Elmas telin çapı | 0.33-0.45mm |
| Kurşun vida ve kılavuz ray | Hassas taşlanmış kurşun vida + yüksek hassasiyetli doğrusal kılavuz |
| Dişli tekerlek yatağı | ithalat |
| sürüş yöntemi | Servo motor |
| Dış boyutlar | 1500*1100*1860mm |
| Makinenin toplam ağırlığı | ≈970kg |
| Toplam güç | 2KW |
| Anma gerilimi | AC220V 50-60Hz |
| Elektrik kesintisi koruması | var |
| kontrol sistemi | X80 – Dokunmatik Ekran |
Uygulama
SSS
Wafer slicing converts silicon ingots into thin wafers using a wire saw. The ingot is mounted and pressed against a wire web moving at high speed. Diamond abrasive or slurry removes material gradually. After slicing, wafers undergo cleaning, lapping to remove damage, and polishing to achieve mirror-like surfaces for device fabrication .
Endless diamond wire saw is considered the best tool for silicon ingot cutting. Compared to band saws, it offers lower edge chipping, superior surface quality, and reduced material wastage . It handles ingots up to 18 inches with ±0.02-0.03 mm repeatability. Some manufacturers also offer electroplated band saws for specific applications .
The machine uses an endless diamond wire loop running continuously between guide rollers . The ingot mounts on a programmable feeder that moves vertically against the wire web. Servo motors control feed rates while coolant removes debris. Multi-axis control enables both slicing and complex shape cutting with ±0.02 mm precision .
Commercial silicon ingot cutting machines typically range from $30,000 to $90,000 depending on capacity and features . A production-grade 18-inch silicon ingot cutter with automation starts around $30,000+, while high-precision research models with advanced controls exceed $80,000. Price varies by ingot diameter, automation level, and precision requirements .
It’s a precision machine tool for semiconductor and photovoltaic industries to cut silicon ingots into wafers and perform cropping/seeding operations . Using endless diamond wire technology, it achieves ±0.02-0.05 mm accuracy with minimal kerf loss, handling ingots up to 18 inches in diameter for applications like top/tail cut, bridging, and seeding .
The machine typically lasts 10-15 years with proper maintenance. Diamond wire life depends on cutting parameters—high-performance wire achieves 250-500 cm²/m cutting area before replacement . Optimized wire management systems minimize non-cutting wear, significantly extending wire life. Wire accounts for approximately 9% of wafer production costs .
