Mô tả Chi tiết
Ưu điểm & Tính năng
Tham số
Thông số sản phẩm
| Tham số | Đặc điểm kỹ thuật |
| X/Y guide rail travel | 250 * 240mm |
| phương pháp cắt | Cắt dọc + cắt bằng tấm định vị |
| Kích thước cắt tối đa | 240 * 200 * 200mm |
| Trọng lượng cắt tối đa | 50kg |
| Hiệu suất cắt tối đa | 1-150mm / phút |
| Phương pháp cố định phôi | Hướng dẫn sử dụng + Nền tảng chuyển đổi nhanh |
| Độ nhám bề mặt cắt | ≤0.2mm |
| độ chính xác cắt | ± 0.05mm |
| Độ lặp lại | ± 0.01mm |
| phương pháp thắt chặt | đối trọng |
| Đường kính dây kim cương | 0.5-0.65mm |
| Trục vít dẫn hướng và ray dẫn hướng | Trục vít dẫn hướng được mài chính xác + ray dẫn hướng tuyến tính độ chính xác cao |
| Vòng bi bánh xe có ren | nhập khẩu |
| phương pháp lái xe | Động cơ bước vòng kín + servo |
| Truyền động dây | Động cơ không đồng bộ |
| Kích thước bên ngoài | 900 * 830 * 1750mm |
| Tổng trọng lượng của máy | ≈628kg |
| Tổng công suất | 2KW |
| Điện áp định mức | AC220V 50-60HZ |
| Bảo vệ khi mất điện | có |
Ứng dụng
FAQ
Diamond wire saws cut hard, brittle materials including ceramics (alumina, zirconia), optical glass, quartz, sapphire, silicon, graphite, carbon composites, and rare-earth magnets . They also cut tungsten, steel, and aluminum . Since diamond is the hardest material, it cuts anything softer .
Diamond wire cutting uses a steel wire embedded with diamond abrasives that move at high speed across the workpiece . Each diamond grain performs micro-cutting, gradually removing material through abrasion . This “cold cutting” process generates no heat-affected zone, thermal stress, or micro-cracks . Cutting fluid removes debris and cools the wire .
Optimal speed depends on material hardness. Endless loop wires run continuously at high speeds up to 80 m/s (48-50 m/s typical) for efficient cutting . Feed rates range from 0.05-40 mm/min, with harder materials requiring slower feed . Research shows balancing wire speed and feed rate optimizes surface finish and throughput .
Two main types exist: reciprocating (open-ended) wire saws that reverse direction, and endless (closed-loop) wire saws that run continuously in one direction . Endless wire saws achieve higher speeds (up to 80 m/s), better surface finish with no wire marks, and reduced vibration . Wire types include rubber-bonded, ceramic-bonded, and metal-bonded for different materials .
Diamond wire uses industrial diamond particles (typically 30-50 μm) embedded in the wire surface . Each particle acts as a microscopic cutting tool . Diamond is hardness 10 on the Mohs scale, making it the sharpest available abrasive for cutting hard materials .
Yes, diamond wire saws cut metals including tungsten, steel, aluminum, and brass . They are particularly effective for hard metals and metal-matrix composites. However, for very ductile metals, proper cooling and lubrication are essential to prevent loading of the diamond abrasives .
An endless diamond wire loop saw uses a closed-loop wire that runs continuously in one direction at high speed (up to 80 m/s) . Unlike reciprocating saws, it eliminates reversal marks, reduces vibration, and achieves superior surface finish . It precision-cuts hard brittle materials including ceramics, sapphire, silicon, and magnets with ±0.05mm accuracy and minimal kerf loss .
Diamonds cannot effectively cut ferrous metals such as iron, steel, and stainless steel. At high cutting temperatures, diamond undergoes graphitization—a chemical reaction where carbon atoms dissolve into the iron, converting diamond into graphite and rapidly dulling the cutting edge. This chemical incompatibility makes diamond tools unsuitable for ferrous materials. For these metals, alternatives like cubic boron nitride or conventional abrasives are recommended.
