Mô tả Chi tiết
Ưu điểm & Tính năng
Tham số
Thông số sản phẩm
| Tham số | Đặc điểm kỹ thuật |
| phương pháp cắt | cắt dọc |
| Kích thước lát cắt tối đa | Φ400mm |
| Kích thước cắt tối đa | 300 * 300 * 300mm |
| Độ dày cắt tối đa | 300mm |
| Độ nhám bề mặt cắt | ≤0.05mm |
| độ chính xác cắt | ± 0.05mm |
| Độ lặp lại | ± 0.01mm |
| phương pháp thắt chặt | đối trọng |
| Đường kính dây kim cương | 0.33-0.45mm |
| Trục vít dẫn hướng và ray dẫn hướng | Trục vít dẫn hướng được mài chính xác + ray dẫn hướng tuyến tính độ chính xác cao |
| Vòng bi bánh xe có ren | nhập khẩu |
| phương pháp lái xe | động cơ servo |
| Kích thước bên ngoài | 1500 * 1100 * 1860mm |
| Tổng trọng lượng của máy | ≈970kg |
| Tổng công suất | 2KW |
| Điện áp định mức | AC220V 50-60HZ |
| Bảo vệ khi mất điện | có |
| hệ thống điều khiển | X80 – Màn hình cảm ứng |
Ứng dụng
FAQ
Wafer slicing converts silicon ingots into thin wafers using a wire saw. The ingot is mounted and pressed against a wire web moving at high speed. Diamond abrasive or slurry removes material gradually. After slicing, wafers undergo cleaning, lapping to remove damage, and polishing to achieve mirror-like surfaces for device fabrication .
Endless diamond wire saw is considered the best tool for silicon ingot cutting. Compared to band saws, it offers lower edge chipping, superior surface quality, and reduced material wastage . It handles ingots up to 18 inches with ±0.02-0.03 mm repeatability. Some manufacturers also offer electroplated band saws for specific applications .
The machine uses an endless diamond wire loop running continuously between guide rollers . The ingot mounts on a programmable feeder that moves vertically against the wire web. Servo motors control feed rates while coolant removes debris. Multi-axis control enables both slicing and complex shape cutting with ±0.02 mm precision .
Commercial silicon ingot cutting machines typically range from $30,000 to $90,000 depending on capacity and features . A production-grade 18-inch silicon ingot cutter with automation starts around $30,000+, while high-precision research models with advanced controls exceed $80,000. Price varies by ingot diameter, automation level, and precision requirements .
It’s a precision machine tool for semiconductor and photovoltaic industries to cut silicon ingots into wafers and perform cropping/seeding operations . Using endless diamond wire technology, it achieves ±0.02-0.05 mm accuracy with minimal kerf loss, handling ingots up to 18 inches in diameter for applications like top/tail cut, bridging, and seeding .
The machine typically lasts 10-15 years with proper maintenance. Diamond wire life depends on cutting parameters—high-performance wire achieves 250-500 cm²/m cutting area before replacement . Optimized wire management systems minimize non-cutting wear, significantly extending wire life. Wire accounts for approximately 9% of wafer production costs .
